YMS Silicone

Dongguan, China · Silicone Electronic Components Manufacturer

Custom silicone electronic components, from drawing to mass production.

Guangdong Yumingsheng Precision Manufacturing (YMS) is an OEM/ODM silicone manufacturer with 15 years of experience. We serve brands, equipment manufacturers, EMS providers and importers with keypads, seals, cable protection, cushioning and precision components.

  • OEM / ODM & private label
  • Solid & liquid silicone
  • Wholesale and volume only, no retail
Custom silicone electronic components

15 yrs

OEM / ODM experience

±0.1 mm

Tolerance capability

Manufacturing Capability

Verifiable capacity behind every quote.

Dedicated solid and liquid silicone lines, experienced quality staff and an ISO 9001-based process, so batches stay consistent from sample to repeat order.

15+

Years of OEM / ODM experience

32

Solid silicone machines

32

Liquid silicone machines

5+

Years of experience per line QC

±0.1 mm

Dimensional tolerance (suitable geometries)

ISO 9001

Quality control process

Post-processing

  • Die-cutting
  • Adhesive backing
  • Dispensing
  • Spray coating
  • Silk screen
  • Pad printing
  • UV treatment

One-stop service: product design, mold development and mass production, using food-grade eco-friendly silicone raw materials.

Challenges & Custom Solutions

The problems we engineer out of your parts.

Each challenge below is paired with how we handle it, from DFM review through production and inspection.

01

Precision

Challenge

Parts drift out of tolerance, causing assembly rework and field failures.

Our approach

Precision tooling and automated injection hold tolerance to ±0.1 mm on suitable geometries, checked at first article and during the run.

02

Sealing

Challenge

Leaks, compression set and inconsistent gasket fit between batches.

Our approach

Durometer and material selection, sealing-lip geometry reviewed in DFM, and compression and aging checks for your use case.

03

Conductivity

Challenge

Unstable contact performance in keypads and conductive parts.

Our approach

Conductive silicone options and contact designs, validated with functional tests against your specification.

04

Durability

Challenge

Tearing, cracking, surface wear and loss of elasticity over time.

Our approach

Tear, tensile and aging validation, plus coating, spray and UV surface treatments chosen for the environment.

05

Assembly

Challenge

Flash, poor housing fit and weak bonding between silicone, plastic and metal.

Our approach

DFM for assembly, multi-material bonding, adhesive backing and adhesion checks before release.

06

Supply stability

Challenge

Delays, batch variation and capacity bottlenecks on repeat orders.

Our approach

32 solid and 32 liquid silicone machines, ISO 9001-based processes and SOP sampling for repeatable batches.

From Drawing to Mass Production

A clear seven-step path to volume.

Concept, design, tooling, sample approval and large-scale production in one workflow, so nothing gets lost between suppliers.

  1. 1

    Requirement Review

    Drawings, samples, volumes, environment and target cost.

  2. 2

    DFM

    Feedback on wall thickness, parting, tolerances and material.

  3. 3

    Tooling

    Mold design and build for solid or liquid silicone.

  4. 4

    Sampling

    Samples for fit, feel and function approval.

  5. 5

    Pilot Run

    Small batch on production process to confirm stability.

  6. 6

    Mass Production

    Scaled output with in-process quality control.

  7. 7

    Delivery

    Final inspection, packaging and shipping support.

Materials & Molding Processes

The right material and process for each part.

We use 100% food-grade eco-friendly silicone raw materials and choose solid or liquid silicone molding according to the geometry, volume and function of your part.

Solid silicone (HCR)

A versatile choice for keypads, seals, grommets and general-purpose parts, available across a wide hardness range.

  • Keypads, gaskets, sleeves and bumpers
  • Pairs with die-cutting, adhesive backing and surface printing
  • Cost-effective for mid-volume and larger parts
Ask which fits your part
Solid silicone (HCR)

Quality Control & Testing

Checked at every stage, not just at the end.

Five control points follow the part from raw material to shipment. Performance validation is selected to match each project's application.

  1. 1

    Incoming

    Raw material lot checks; RoHS / REACH reports where the project requires them.

  2. 2

    First Article

    Dimension and appearance sign-off before the run starts.

  3. 3

    In-Process

    Line-side checks by QC staff with 5+ years of experience.

  4. 4

    Finished Goods

    Full inspection of appearance, dimensions, function and adhesion.

  5. 5

    Outgoing

    SOP-based sampling and packaging check before shipment.

Performance validation

Applied according to project requirements:

  • Tensile strength
  • Tear resistance
  • Aging resistance
  • Constant temperature & humidity
  • High / low temperature
  • Impact test
  • Dimensional measurement
  • Adhesion check

Compliance support

Standards we can support on a per-project basis. Reports and documentation are confirmed for your material and part.

  • CE
  • FDA
  • LFGB
  • UL
  • RoHS
  • REACH

Project Cases & Engineering Solutions

How we work through a problem: from issue to delivery.

Every project is documented in four stages: problem, solution, validation and delivery. Verified project data will replace the placeholders below.

Precision keypad project placeholder Placeholder

Case 01 · Silicone keypad

Precision keypad project (title to be provided)

1Problem
Describe the engineering challenge: tolerance, sealing, conductivity, durability or assembly fit.
2Solution
Describe the material, tooling and process decisions made during DFM.
3Validation
List the tests and measurements performed, with real results.
4Delivery
Describe the order volume, lead time and packaging, once confirmed by the customer.
Sealing component project placeholder Placeholder

Case 02 · Gasket / seal

Sealing component project (title to be provided)

1Problem
Describe the engineering challenge: tolerance, sealing, conductivity, durability or assembly fit.
2Solution
Describe the material, tooling and process decisions made during DFM.
3Validation
List the tests and measurements performed, with real results.
4Delivery
Describe the order volume, lead time and packaging, once confirmed by the customer.
Multi-material assembly project placeholder Placeholder

Case 03 · Silicone + plastic / metal

Multi-material assembly project (title to be provided)

1Problem
Describe the engineering challenge: tolerance, sealing, conductivity, durability or assembly fit.
2Solution
Describe the material, tooling and process decisions made during DFM.
3Validation
List the tests and measurements performed, with real results.
4Delivery
Describe the order volume, lead time and packaging, once confirmed by the customer.

Work With Us

A partnership model for every kind of buyer.

We are a manufacturer and OEM/ODM supplier, not a retailer. Wholesale, brand customization and volume manufacturing are our core services.

01

Brand Owners

Launch or extend a product line with custom tooling, branded packaging and stable supply.

Talk to our team →
02

Equipment Manufacturers

Fit-for-function silicone parts to your drawings, with DFM support and repeat-order consistency.

Talk to our team →
03

OEM / ODM Partners

A manufacturing partner for design, tooling and volume production behind your own customers.

Talk to our team →
04

EMS Providers

Components that drop into your assembly line, with predictable lead times and quality records.

Talk to our team →
05

Procurement & R&D Teams

Engineering-level answers, sample support and clear quotations for sourcing decisions.

Talk to our team →

Technical Articles & Sourcing Guides

Materials, design, process, quality and sourcing, explained.

Practical reading for engineers and buyers specifying custom silicone parts.

Request a Quote

Send your drawing. Get a DFM review and a custom quote.

Upload 2D drawings, 3D models or photos of your sample. We'll review manufacturability and tell you what else we need.

  • 2D drawings (PDF, DWG, DXF)
  • 3D models (STEP, IGES, STL)
  • Sample photos, specs or a description of the part

Phone & WhatsApp

+86 13418983587

Factory address

No. 50 Jinyuan New Road, Shilongkeng Village, Liaobu Town, Dongguan, Guangdong, China

Request DFM Review & Quote

Fields marked * are required. Your files are treated as confidential, and an NDA is available on request.

PDF, DWG, DXF, STEP, IGES, STL, ZIP, JPG or PNG. If your files are large, email them to edwin@gd-yums.com.